Fireplace Inserts in Woodland Hills: Written Report, Licensed Technicians

Last fall, a homeowner on a quiet street behind Tujunga Village called us about converting her wood-burning fireplace to gas logs. She'd stopped burning wood years ago after the AQMD no-burn days became more frequent, and the old masonry firebox was collecting dust. She liked the idea of a gas insert for occasional evening use, maybe fifteen times a season. But when she had a contractor out to quote the gas line, he noticed crumbling mortar joints inside the firebox and told her to get the chimney looked at before anyone touched the flue. That's when she reached us.

Her situation is common along the Ventura Boulevard flats and the surrounding residential blocks. These homes were built in the 1950s and 1960s with single-wythe brick chimneys and clay tile flue liners. Decades of mild seismic activity have left hairline cracks in the tile liner that you can't see without a camera inspection. If you drop a gas insert into that kind of flue without addressing the liner, you risk carbon monoxide leaking through those cracks into wall cavities. She was right to pause. The real question was whether her existing masonry could support a modern insert at all, or whether the chimney needed relining first. We scheduled a Level 2 inspection for the following week.

Our technician ran a camera scan through the full length of her flue, following NFPA 211 Level 2 inspection standards. The results confirmed what the contractor suspected. Two clay tile sections in the mid-flue had shifted at their joints, leaving gaps of roughly a quarter inch. There was also 2nd-degree creosote buildup from her old wood-burning days clinging to the tile walls. None of this was visible from the firebox or the rooftop. For a wood-to-gas-log conversion in masonry like this, the fix is a continuous stainless steel liner sized to the BTU rating of the gas insert. The liner bypasses the cracked clay tiles entirely and gives the insert a sealed, code-compliant exhaust path.

We installed a direct-vent gas insert with an efficiency rating above 70%, paired with a properly sized stainless liner that runs from the insert collar to the chimney crown. The Moorpark Street corridor and surrounding blocks have dozens of chimneys with this same 1960s construction, and the conversion process follows the same logic each time: inspect the flue with a camera, assess the masonry condition, and reline before the insert goes in. If you're considering a gas insert or even an EPA-certified wood insert, your flue liner is the first thing that needs evaluation. A chimney inspection is the place to start, and we can walk you through what your specific chimney needs.